Hear from Our Customers
Your floors become four times stronger than bare concrete. Chemical spills, oil leaks, and forklift traffic won’t leave permanent marks or damage.
Cleaning becomes effortless—spills wipe up easily instead of soaking into porous concrete. No more scrubbing oil stains or dealing with dust that concrete floors constantly shed.
You get a professional appearance that actually reflects your business quality. The seamless, high-gloss finish brightens your workspace and creates the kind of first impression that wins customers and keeps employees proud of where they work.
We bring over 10 years of painting expertise to Oak Park’s industrial corridor. We understand what works in Michigan’s harsh climate and what doesn’t.
We’ve seen the aftermath of failed floor coatings—businesses dealing with peeling, chipping surfaces after just months. That’s why we use only premium materials and proven installation methods.
Oak Park’s automotive suppliers, manufacturing facilities, and warehouses need floors that perform under real-world conditions. We deliver solutions that handle Michigan winters, heavy equipment, and chemical exposure without failing.
Surface preparation comes first—we diamond grind your concrete to create the proper profile for maximum adhesion. This step determines whether your floor lasts 2 years or 20 years.
Our primer system penetrates deep into concrete pores, creating a chemical bond that won’t fail. Most coating failures happen because contractors skip proper priming to save time and money.
The epoxy base coat and protective topcoat get applied under controlled conditions with precise timing. Each layer must cure properly before the next application. The result is a seamless surface ready for heavy use within 72 hours.
Ready to get started?
Complete surface preparation, crack repair, and moisture testing come standard. We don’t cut corners on prep work because that’s where 90% of failures start.
You get premium 100% solids epoxy systems—not the water-based products that fail within a year. Our materials handle Michigan’s freeze-thaw cycles and industrial demands.
Oak Park’s manufacturing and automotive businesses operate in demanding environments. Our systems are proven in similar facilities throughout Southeast Michigan, handling forklift traffic, chemical spills, and temperature extremes without showing wear.
Quality epoxy floor systems last 15-20 years in commercial environments when installed correctly. Compare that to 2-3 years for typical store-bought products.
The difference is using 100% solids epoxy with proper surface preparation. Our systems handle heavy machinery, chemical spills, and daily abuse without showing significant wear.
We’ve installed floors in Oak Park warehouses and manufacturing facilities that still look excellent after 10+ years. The investment pays for itself through eliminated maintenance headaches and replacement costs.
Uncoated concrete absorbs oils, chemicals, and stains permanently. These contaminants weaken the concrete and create slippery safety hazards that get worse over time.
Epoxy creates a seamless barrier that repels all liquids. Spills stay on the surface where you can clean them up completely without permanent staining or damage.
You also get better lighting from the reflective surface and improved slip resistance. The smooth finish eliminates concrete dust and creates a professional appearance that reflects well on your business.
Yes, but only with proper preparation. We diamond grind to remove all existing coatings and create the surface profile needed for permanent adhesion.
Coating over painted surfaces without proper prep leads to delamination and complete failure. The new coating is only as strong as what it’s bonded to.
This preparation takes time but prevents the costly failures we see from contractors who take shortcuts. We’d rather do it right once than have you deal with a failed floor in six months.
Each crack gets evaluated individually to determine the best repair method. Small cracks get filled with flexible compounds that move with concrete during temperature changes.
Larger damaged areas require concrete patching or grinding to create a perfectly level surface. We never coat over problems because they’ll show through the new floor.
Michigan’s freeze-thaw cycles put extra stress on concrete. Our repair methods account for this movement to prevent new cracks from forming and ensure a smooth, durable finished surface.
Store products are water-based systems with low solids content designed for light residential use. They fail quickly under commercial conditions.
We use 100% solids epoxy systems that are 10 times thicker with superior chemical and abrasion resistance. Our materials are formulated specifically for industrial applications.
Professional installation also requires precise mixing, timing, and environmental controls. DIY products sacrifice performance for ease of application, which is why they fail so quickly in demanding environments.
Most commercial installations take 2-3 days depending on project size and complexity. This includes surface preparation, primer, base coat, and topcoat application.
You can walk on the floor after 24 hours, but wait 72 hours before resuming normal operations with heavy equipment. This allows the chemical cure to reach full strength.
We work around your schedule to minimize business disruption. Weekend installations are available for facilities that can’t shut down during business hours. Proper curing time is essential—we never rush this process.
Local Resources
Useful Links
Other Services we provide in Oak Park
