Hear from Our Customers
You bought your home to enjoy it, not stress about rotting deck boards. Here’s what happens when you get real deck staining done right in Holly.
Your deck stops absorbing water like a sponge. No more gray, weathered wood that screams “neglected property.” No more splinters catching your kids’ feet or your guests’ clothes.
Instead, you get a deck that looks intentional. Rich color that makes your neighbors wonder if you installed something brand new. Wood that sheds water instead of soaking it up, which means fewer repairs and more years of actual use.
Legends Construction brings over 10 years of painting experience to every deck staining project in Holly. We’re not a fly-by-night operation or some guy with a pressure washer.
We understand Michigan weather. We know what products actually hold up against Holly’s freeze-thaw cycles, summer UV, and everything in between. That’s why homeowners call us back for their next project instead of searching for someone to fix what we did.
Our approach is straightforward: do the work right the first time so you don’t need us again for years. But when you do, we’ll be here.
First, we strip away any failing stain that’s peeling or wearing thin. This isn’t optional – new stain over failing stain is money wasted.
Next comes the deep clean. We pressure wash with wood brightener to get down to bare wood, removing years of dirt, mildew, and that chalky residue that builds up. If we find damaged boards, we’ll replace them so everything matches when we’re done.
Then we apply the stain by hand – no spraying that gets all over your siding and landscaping. We use proven products that penetrate deep into the wood grain and create a barrier that actually protects. The whole process takes a few days depending on size and weather, but you get results that last years instead of months.
Ready to get started?
Professional deck staining in Holly means using products designed for Michigan’s climate extremes. We’re talking UV-resistant stains that don’t fade after one summer, formulations that handle freeze-thaw cycles without cracking or peeling.
Holly gets hit with everything – brutal winter ice, spring rain that won’t quit, summer heat that bakes everything dry. Your deck stain needs to handle all of it. That’s why we use semi-transparent stains that let the wood breathe while creating a protective barrier.
You’ll see the difference immediately. Rich, even color that enhances your home’s appearance instead of looking like someone just slapped some paint on wood. More importantly, you’ll see it lasting. Most Holly homeowners get 3-4 years before needing another coat, compared to the annual touch-ups required with cheap products or poor application.
Deck staining typically takes 24-48 hours to fully cure in Holly, depending on temperature and humidity. Michigan weather can be unpredictable, so we always check the forecast before starting your project.
During spring and fall – the best times for staining – you’ll usually see dry-to-touch in 4-6 hours and full cure within two days. Summer heat speeds this up, but high humidity can slow it down. We never rush the process because proper curing is what gives you long-lasting protection.
We’ll let you know exactly when it’s safe to walk on your deck and move furniture back. Patience during the drying process is what separates a professional job from one that fails in six months.
Most Holly decks need restaining every 2-3 years, but it depends on exposure and the quality of previous work. South-facing decks that get full sun all day might need attention sooner than shaded areas.
Here’s the test: if water soaks into the wood instead of beading up on the surface, it’s time. If the color is fading or you see gray patches, don’t wait – that’s UV damage happening in real time.
We’ve seen decks that were done right go four years before needing attention, and others that needed work after just one season because of poor products or application. The key is using quality stain and proper prep work from the start.
Stain penetrates into the wood grain and lets it breathe, while paint sits on top like a film. For Holly’s climate, stain is almost always the better choice because it handles temperature swings without cracking or peeling.
Paint might look good initially, but Michigan’s freeze-thaw cycles will cause it to fail. You’ll see cracking, peeling, and moisture getting trapped underneath. That leads to rot and expensive repairs.
Semi-transparent stain gives you color while still showing the wood grain and allowing moisture to escape naturally. It’s the sweet spot between protection and appearance that works best for our climate.
Only if the existing stain is in good condition and properly adhered. Most of the time, we need to strip the old stain first, especially if it’s peeling, wearing thin, or was applied over a previous coating.
Stain over failing stain is a waste of your money. It won’t penetrate properly and will start failing within months. We’d rather do the prep work right and give you results that last than take shortcuts that come back to bite you.
We’ll assess your deck’s current condition and let you know exactly what prep work is needed. Sometimes a good cleaning and light sanding is enough, but often stripping is the only way to get professional results.
Yes, we stand behind our work because we use quality products and proper application methods. Our goal is customer satisfaction that leads to repeat business, not one-time transactions.
If you see premature failure due to our workmanship or materials within the first year, we’ll make it right. That said, we’re upfront about what causes stain failure – poor maintenance, damage from furniture or grills, or extreme weather events are outside our control.
We’ve been in business for over 10 years because we do the work right the first time. Most of our customers call us back for their next project because they’re happy with the results, not because they need us to fix problems.
Spring and early fall are ideal for deck staining in Holly. You want moderate temperatures between 50-80 degrees and low humidity for optimal stain penetration and curing.
Avoid summer’s hottest days when stain can dry too fast and not penetrate properly. Winter is obviously out due to temperature and moisture. Late spring after the last frost and early fall before temperatures drop are your best windows.
We typically book these prime seasons months in advance because every Holly homeowner wants their deck done during the same weather windows. The key is planning ahead and getting on the schedule early.
Local Resources
Useful Links
Other Services we provide in Holly
